Offset Pedal Mounting Brackets

Helweg Design

or 4 interest-free payments on orders over $ 35
by

The Helweg Design pedal mounting system locks down your gear for a professional, no-compromise pedalboard setup.

Our most versatile bracket is offset and adjustable to mount pedal enclosures of many different shapes and sizes.

Packaged for one individual pedal.


RMC Picture Wah with pedal mounting brackets

Fine-tuned to expertly screw-mount popular effects like Strymon and most wah, volume, and expression pedals, this problem-solving bracket can also mount many rare and unique pedals, switching units, and multi-effects




Hardware Packs

All packages include

  • Offset Pedal Mounting Brackets
  • #6 Wood screws with washers
  • 3M Bumpon feet
  • Counter-sunk or flat washers 
    • Includes the basic parts needed for dozens of pedal styles. This pack requires you to reuse your original enclosure screws. 

      Available in a two-bracket pack for small pedals, a three-pack for medium-size pedals, and a four-pack for larger units.

      Recommended for: Strymon, RMC wah

      Mounting Brackets for small effect pedals
    • Includes replacement screws (#6-32 x 5/16") for many common wah, volume, and expression pedals. (Original screws are often too long once rubber feet are removed.) 

      Contains four brackets and wide counter-sunk washers for strength and a firm grip

      Recommended for: Mission EngineeringErnie Ball, Vox, Dunlop CryBaby, Xotic Wah, Fulltone Clyde wah pedals

      Mounting Brackets for wah_volume_expression pedals
    • Includes longer replacement screws (#6-32 x 3/8") for many classic pedals. (Many stock enclosure screws are too short for the added bracket thickness.)

      Available in a two-bracket pack for small pedals, a three pack for medium-size pedals, and a four pack for larger units.

      Recommended for: Origin Effects, BK Butler Tube Driver, Moog, Rat, Fuzz Face, Tycobrahe Octavia, Fulltone two-switch pedals

      Mounting Brackets for wah_volume_expression pedals
    • We're working to assemble additional hardware packs. If you find a pedal that needs different hardware, please let us know.



    • 15-gauge steel
    • Textured black powder-coat finish
    • Mount pedals to any flat, wooden surface
    • Manufactured in the Kansas City metro area
    • 5-year warranty
    Adjustable Pedal Mounting Bracket
    • Length: 1.44" (36mm)
    • Width: 0.56" (14.5 mm)
    • Height: 0.215" (5.5 mm)
    • Bracket Weight: 0.2 oz.
    Helweg Design Adjustable Pedal Mounting Bracket Specs

Need help mounting your gear?

Full setup services are available for custom pedalboard orders with the consulting package.

Visit our custom shop for more information.

FAQ

What can I mount with Helweg Offset brackets?

The Offset brackets pick up where our smaller countersunk brackets leave off. They're larger and deeper and can mount a wider variety of enclosure styles. 

For common MXR-style enclosures, our Countersunk brackets will be lower profile and more cost effective. 

We recommend a two-bracket pack for small pedals, a three pack for medium-size pedals (Strymon Flint), and a four pack for larger heavier units (wah, volume, and expression pedals).

The Offset brackets can also mount many extra-large switchers and control units. These units sometimes have six or more bottom screws, which can be used to mount additional brackets for extra support.

What tools are required?

For best results, drill mounting holes in the pedalboard deck using an electric hand drill with a 3/32” drill bit. Drive in and remove the wood screws once before adding the brackets. After that, brackets can be quickly mounted and removed with a drill gun or Phillips screwdriver.

Most enclosures use basic Phillips-head screws. However, mounting some pedals requires alternate-sized Phillips bits, flat head bits, or even specialty bits (TC Electronics).

Always install enclosure screws by hand to avoid damaging the pedal. A drill gun should only be used for mounting wood screws in the pedalboard deck.

Will I need additional parts?

Our hardware packs facilitate easy installation for thousands of pedals, and we continue to devise new packs for not-so-common ones. If you find an enclosure not yet accounted for, contact us for assistance.

It's often possible to find a suitable screw or spacer at your local hardware store. When sourcing new enclosure screws, line up the threads with an original screw to ensure they match.

Can I mount pedals to a metal board surface?

This slightly more technical endeavor can be achieved using machine screws backed with a washer and nut. Results will be best with a drill press, quality metal drill bits, and some experience.



Related Items